اجازه ویرایش برای همه اعضا

آئینه

نویسه گردانی: ʼAʼYNH
آینه، وسیله‌ای است که به علت صافی و بازتاب بالایش، بر رویهٔ خود، تصویر اجسام را نشان می‌دهد. پرتوهای نور بازتابیده از رویهٔ یک آینه در نقطه‌ای به نام نقطه کانونی آینه به هم می‌رسد. بسته به دوری جسم تا آینه و نوع آینه، فاصله نقطه کانونی آینه از آن متفاوت است.

تاریخچه

کهن‌ترین نشانه‌های آینه مربوط به ۶۰۰۰ پیش از میلاد است که در آناتولی (در ترکیه) یافت شده‌است. پس از آن در ۴۰۰۰ پ.م. می‌توان تمدن‌های میانرودان را نام برد. در مصر باستان کهن‌ترین نشانه از آینه به حدود ۳۰۰۰ پ.م. باز می‌گردد. نمونه‌ای دیگر از وجود آینه به حدود ۳۰۰۰ سال پیش در ایران می‌رسد که یعنی در زمان هخامنشیان که آن‌ها با صیقل دادن سنگ‌ها و فلزات، آنها را به آینه‌هایی شفاف تبدیل می‌کردند که آثار آن در تالار آینهٔ تخت جمشید باقی مانده‌است. آینه‌های صیقل‌شده در آمریکای جنوبی و مرکزی به ۲۰۰۰ پیش از میلاد باز می‌گردد. در چین آینه‌های برنجی به ۲۰۰۰ پیش از میلاد باز می‌گردد. آینه‌های روکش شده از فلز در صیدای لبنان در سدهٔ یکم پس از میلاد یافت شده‌است. آینه‌های شیشه‌ای با روکشی از ورقهٔ طلا در نوشته‌های پلینی مهتر در کتاب «تاریخ طبیعی (پلینی)» در سال ۷۷ پس از میلاد نوشته شده‌است.

در سدهٔ ۱۲ میلادی شیشه در فراوری آینه، به شکل گسترده به کار گرفته شد و نخستین آینه‌های شیشه‌ای که با ورقه‌هایی پوشیده از سرب به بازار عرضه می‌شدند بوجود آمدند. زمانی بعد ماهیت سمی بودن سرب آشکار گردید و به همین دلیل استفاده از مخلوط جیوه و قلع بجای سرب آغاز شد. این تغییر و دگرش‌ها باعث شدند که ونیز که در آن زمان محل تولید اینگونه آینه‌ها بود به یک قطب اقتصادی تبدیل شود. با وجود این، اختراع و فراوری آینه را نباید جزو نیازهای نخست و تنها در حد یک ابزار شخصی پنداشت، امروزه کاربردهای دانشی آینه‌ها بسیار بیشتر از کاربردهای نخستین و نمایی آنها هستند.

داشنمندان از مدتها پیش ویژگی‌های آینه‌های تخت و کوژ و کاو (محدب و مقعر) را می‌شناختند و حتا با بهره از آنها برای متمرکز کردن نور آفتاب وسایلی را برای به آتش کشیدن اجسام اختراع کرده بودند. حتا در این مورد افسانه‌ای وجود دارد که می‌گویند ارشمیدس دانشمند نامدار سدهٔ سوم پیش از میلاد بوسیله شبکه‌ای از اینگونه آینه‌ها، کشتیهای بادبانی مهاجمان رومی را به آتش می‌کشیده‌است، تا اینکه فرمانروای روم سرانجام در شب موفق به تسخیر شهر «سیراکوز» می‌گردد. آینه ی بر آمده یک آینه ی قدیمی است

گونه‌ها

آینه‌ها بر پایهٔ ساختار به گونه‌های زیر بخش می‌شوند:

آینه‌های تخت
آینه‌های شیشه‌ای
آینه‌های فلزی
آینه‌های لایه گذاری شده
آینه‌های کروی
آینهٔ کاو یا مقعر
آینهٔ کوژ یا محدب
آینه‌های شلجمی (در چراغ خودروها)
آینه‌های توان بالا (کاربرد در آزمایش و محاسبات)
آینه‌ها بر پایهٔ جنس به گونه‌های زیر بخش می‌شوند:

آینه‌های شیشه‌ای
آینه‌های فلزی
آینه‌های مایع
ساخت

بسیاری از آینه‌ها با افزودن روکش بازتابنده به یک لایهٔ مناسب ساخته می‌شوند. در بیش‌تر آینه‌ها این لایه به شَوَند(دلیل) آسانی ساخت، سختی، و توانایی داشتن رویهٔ صاف، شیشه است. روکش بازتابنده بیش‌تر به رویهٔ پشت آینه افزوده می‌شود تا از فرسایش و آسیب‌های ناگهانی در پناه بماند.

این لایه شکل داده می‌شود، صیقل داده می‌شود و پاک می‌شود تا سپس روکش شود. آینه‌های شیشه‌ای بیش‌تر با نقره یا آلومنیوم به همراه مجموعه‌ای از دیگر روکش‌ها، روکش می‌شوند.

۱-قلع ۲-نقره ۳- کُنانَنده(فعال‌سازهای) شیمیایی ۴- مس + okhtak(؟) ۵- رنگ

قلع نخست افزوده می‌شود، چراکه نقره نمی‌تواند به شیشه بچسبد. کناننده‌ها باعث سختی قلع/نقره می‌شوند. مس برای ماندگاری و دیرپایی افزوده می‌شود. رنگ (بیش‌تر موارد سبز) در پشت آینه از خراش‌ها و آسیب‌های ناگهانی جلوگیری می‌کند.

در برخی کاربردها، به ویژه آن‌ها که هزینه اهمیت دارد و یا به دیرپایی بسیار نیازمندند، آینه‌ها از یک مادهٔ توپر مانند فلز صیقل‌زده، ساخته می‌شوند.

برای کاربردهای فنی مانند آینه‌های لیزری، روکش بازتابنده بیش‌تر به روش نشست مکنده به روی رویهٔ بیرونی لایه روكش می‌شود. این کار از بازتاب دوباره و از جذب نور در آینه جلوگیری می‌کند. آینه‌های فنی ارزان‌تر، از روکش نقره، آلومنیوم یا طلا بهره می‌برند (طلا بیش‌تر برای آینه‌های فروسرخ) و بازتاب‌های ۹۰-۹۵٪ را تا هنگامی که نو هستند، بدست می‌آورند. یک روکش محافظ ممکن است برای جلوگیری از اکسید شدن لایهٔ بازتابنده افزوده شود. کاربردهایی که به بازتاب بیش‌تر و یا ماندگاری بیش‌تر نیازمندند، از روکش ترابرقی بهره می‌برند، که می‌تواند بازتاب‌هایی به اندازهٔ ۹۹٫۹۹۹٪ را در یک بازهٔ کوچک از طول‌موج‌ها بدست آورد.

کاربردها

از جمله کاربردهای آینه‌ها می‌توان موارد زیر را نام برد:

تلسکوپ‌ها: شاید مهم‌ترین کاربرد آینه در تلسکوپ‌ها بوده باشد، که باعث شد دید آدمی فراتر از زمین رود.
سامانه‌های رادار و روش‌های پیچیدهٔ هواپیمایی
میکروسکوپ‌ها
ابزارآلات پزشکی
در خودروها جهت افزایش میدان دید.
در دوربین‌های شکاری
در عینک‌های مختلف
تلسکوبهای زیردریایی
آینه در ادبیات فارسی
گاهی در ادبیات عرفانی آینه به دل شخص مؤمن اشاره دارد، آن‌گاه که، از زنگارها و تیرگی‌های ناشی از حرص، حسد، عجب، و خودبینی پاک و صیقلی شده باشد.[نیازمند منبع]

عکس روی تو که در آینهٔ جام افتاد عارف از خندهٔ می‌در طمع خام افتاد
حسن روی تو به یک جلوه که در آینه کرد این همه نقش در آیینهٔ اوهام افتاد
این همه عکس می ونقش نگارین که نمود یک فروغ رخ ساقیست که در جام افتاد
{{{2}}}
پیوند به بیرون

در ویکی‌انبار پرونده‌هایی دربارهٔ آینه موجود است.
آینه در وب‌گاه رشد
اطلاعاتی کامل دربارهٔ آینه‌ها
برای اطلاعات کامل در خصوص ساخت انواع مختلف ائینه‌ها و روش‌های تولید آن می‌توانید به کتاب زیر نوشته دکتر بهزاد خسروپناه مراجعه نمائید. How to make Mirrors by spray method A Practical Book By Dr.Behzad Khosropanah

منبع

کتاب درسی سال دوم راهنمایی ایران، سال ۱۳۸۶
آینه در وب‌گاه رشد
Optics- Hecht, Eugene , 4th ed., Pearson Education- ۲۰۰۱
آیینه2001
جستارهای وابسته

آینه چندلایه‌ای
اپتیک
پراش براگ
رده‌های صفحه: انواع آینهنورشناخت هندسیکاربردهای شیشه.
از ویکی پدیا

همچنین:
A mirror is an object that reflects light or sound in a way that preserves much of its original quality prior to its contact with the mirror. Some mirrors also filter out some wavelengths, while preserving other wavelengths in the reflection. This is different from other light-reflecting objects that do not preserve much of the original wave signal other than color and diffuse reflected light. The most familiar type of mirror is the plane mirror, which has a flat surface. Curved mirrors are also used, to produce magnified or diminished images or focus light or simply distort the reflected image.
Mirrors are commonly used for personal grooming or admiring oneself (in which case the archaic term looking-glass is sometimes still used), decoration, and architecture. Mirrors are also used in scientific apparatus such as telescopes and lasers, cameras, and industrial machinery. Most mirrors are designed for visible light; however, mirrors designed for other types of waves or other wavelengths of electromagnetic radiation are also used, especially in non-optical instruments.
Contents [hide]
1 History
2 Manufacturing
3 Types of glass mirror
4 Effects
4.1 Shape of a mirror's surface
4.2 Mirror image
5 Applications
5.1 Safety and easier viewing
5.2 Two-way versus one-way mirrors and windows
5.3 Signalling
5.4 Technology
5.4.1 Televisions and projectors
5.4.2 Instruments
5.4.2.1 Face-to-face mirrors
5.4.3 Military applications
5.4.4 Seasonal lighting
5.5 Leisure
5.5.1 Art
5.5.1.1 Paintings
5.5.1.2 Other artistic mediums
5.5.2 Decoration
5.5.3 Entertainment
5.5.4 Film and television
5.5.5 Literature
6 Mirrors and psychology
7 Mirrors and superstition
8 Mirrors and animals
9 Unusual kinds of mirrors
10 See also
11 Notes
12 References
13 Bibliography
14 External links
[edit]History



Seated woman holding a mirror.Ancient Greek Attic red-figure lekythos, ca. 470-460 BC, National Archaeological Museum, Athens


A sculpture of a lady looking into a mirror, India
The first mirrors used by people were most likely pools of dark, still water, or water collected in a primitive vessel of some sort. The earliest manufactured mirrors were pieces of polished stone such as obsidian, a naturally occurring volcanic glass. Examples of obsidian mirrors found in Anatolia (modern-day Turkey) have been dated to around 6000 BC. Polished stone mirrors from Central and South America date from around 2000 BC onwards.[1] Mirrors of polished copper were crafted in Mesopotamia from 4000 BC,[1] and in ancient Egypt from around 3000 BC.[2] In China, bronze mirrors were manufactured from around 2000 BC,[3] some of the earliest bronze and copper examples being produced by the Qijia culture. Mirrors made of other metal mixtures (alloys) such as copper and tin speculum metal may have also been produced in China and India.[4] Mirrors of speculum metal or any precious metal were hard to produce and were only owned by the wealthy.[5]
Metal-coated glass mirrors are said to have been invented in Sidon (modern-day Lebanon) in the first century AD,[6] and glass mirrors backed with gold leaf are mentioned by the Roman author Pliny in his Natural History, written in about 77 AD.[7] The Romans also developed a technique for creating crude mirrors by coating blown glass with molten lead.[8]
Parabolic mirrors were described and studied in classical antiquity by the mathematician Diocles in his work On Burning Mirrors.[9] Ptolemy conducted a number of experiments with curved polished iron mirrors,[10] and discussed plane, convex spherical, and concave spherical mirrors in his Optics.[11] Parabolic mirrors were also described by the physicist Ibn Sahl in the 10th century,[12] and Ibn al-Haytham discussed concave and convex mirrors in both cylindrical and spherical geometries,[13] carried out a number of experiments with mirrors, and solved the problem of finding the point on a convex mirror at which a ray coming from one point is reflected to another point.[14] By the 11th century, clear glass mirrors were being produced in Moorish Spain.[15][verification needed]
In China, people began making mirrors with the use of silver-mercury amalgams as early as 500 AD.[16] Some time during the early Renaissance, European manufacturers perfected a superior method of coating glass with a tin-mercury amalgam. The exact date and location of the discovery is unknown, but in the 16th century, Venice, a city famed for its glass-making expertise, became a centre of mirror production using this new technique. Glass mirrors from this period were extremely expensive luxuries.[17] The Saint-Gobain factory, founded by royal initiative in France, was an important manufacturer, and Bohemian and German glass, often rather cheaper, was also important.
The invention of the silvered-glass mirror is credited to German chemist Justus von Liebig in 1835.[18] His process involved the deposition of a thin layer of metallic silver onto glass through the chemical reduction of silver nitrate. This silvering process was adapted for mass manufacturing and led to the greater availability of affordable mirrors. Nowadays, mirrors are often produced by the vacuum deposition of aluminium (or sometimes silver) directly onto the glass substrate.
[edit]Manufacturing

Mirrors are manufactured by applying a reflective coating to a suitable substrate. The most common substrate is glass, due to its transparency, ease of fabrication, rigidity, hardness, and ability to take a smooth finish. The reflective coating is typically applied to the back surface of the glass, so that the reflecting side of the coating is protected from corrosion and accidental damage by the glass on one side and the coating itself and optional paint for further protection on the other.
In classical antiquity, mirrors were made of solid metal (bronze, later silver) and were too expensive for widespread use by common people; they were also prone to corrosion. Due to the low reflectivity of polished metal, these mirrors also gave a darker image than modern ones, making them unsuitable for indoor use with the artificial lighting of the time (candles or lanterns).[citation needed]
The method of making mirrors out of plate glass was invented by 16th-century Venetian glassmakers on the island of Murano, who covered the back of the glass with mercury, obtaining near-perfect and undistorted reflection. For over one hundred years, Venetian mirrors installed in richly decorated frames served as luxury decorations for palaces throughout Europe, but the secret of the mercury process eventually arrived in London and Paris during the 17th century, due to industrial espionage. French workshops succeeded in large scale industrialization of the process, eventually making mirrors affordable to the masses, although mercury's toxicity remained a problem[citation needed].
In modern times, the mirror substrate is shaped, polished and cleaned, and is then coated. Glass mirrors are most often coated with non-toxic silver[19] or aluminium, implemented by a series of coatings:[citation needed]
Tin(II) chloride
Silver
Chemical activator[disambiguation needed ]
Copper
Paint
The tin(II) chloride is applied because silver will not bond with the glass. The activator causes the tin/silver to harden. Copper is added for long-term durability.[20] The paint protects the coating on the back of the mirror from scratches and other accidental damage.[citation needed]
In some applications, generally those that are cost-sensitive or that require great durability, mirrors are made from a single, bulk material such as polished metal.[citation needed] For technical applications such as laser mirrors, the reflective coating is typically applied by vacuum deposition on the front surface of the substrate. This eliminates double reflections (a weak reflection from the surface of the glass, and a stronger one from the reflecting metal) and reduces absorption of light by the mirror. Technical mirrors may use a silver, aluminium, or gold coating (the latter typically for infrared mirrors), and achieve reflectivities of 90–95% when new. A protective transparent overcoat may be applied to prevent oxidation of the reflective layer. Applications requiring higher reflectivity or greater durability, where wide bandwidth is not essential, use dielectric coatings, which can achieve reflectivities as high as 99.999% over a narrow range of wavelengths.[citation needed]
[edit]Types of glass mirror



18th century vermeil mirror in the Musée des Arts décoratifs, Strasbourg
There are many types of glass mirrors, each representing a different manufacturing process and reflection type.
An aluminium glass mirror is made of a float glass manufactured using vacuum coating, i.e. aluminium is spread over the glass in the vacuum chamber and then coated with two or more layers of waterproof protective paint.
A low aluminium glass mirror is manufactured by coating silver and two layers of protective paint on the back surface of glass. A low aluminium glass mirror is very clear, light transmissive, smooth, and reflects accurate natural colors. This type of glass is widely used for framing presentations and exhibitions in which a precise color representation of the artwork is truly essential or when the background color of the frame is predominantly white.[citation needed]
A safety glass mirror is made by sticking a special protective film on the back surface of a silver glass mirror, which prevents injuries in case the mirror is broken. This kind of mirror is used for furniture, doors, glass walls, commercial shelves, or public areas.[citation needed]
A silkscreen printed glass mirror is produced using inorganic color ink that prints patterns through a special screen onto glass. Various colors, patterns, and glass shapes are available. Such a glass mirror is durable and more moisture resistant than ordinary printed glass and can serve for over 20 years. This type of glass is widely used for decorative purposes (e.g., on mirrors, table tops, doors, windows, kitchen chop boards, etc.).[citation needed]
A silver glass mirror is an ordinary mirror, coated on its back surface with silver, which produces images by reflection. This kind of glass mirror is produced by coating a silver, copper film and two or more layers of waterproof paint on the back surface of float glass, which perfectly resists acid and moisture. A silver glass mirror provides clear and actual images, is quite durable, and is widely used for furniture, bathroom and other decorative purposes.[citation needed]
Decorative glass mirrors are usually handcrafted. A variety of shades, shapes and glass thickness are often available.[citation needed]
[edit]Effects

See also: Mirror image and Specular reflection
[edit]Shape of a mirror's surface
A beam of light reflects off a mirror at an angle of reflection equal to its angle of incidence (if the size of a mirror is much larger than the wavelength of light). That is, if the beam of light is shining on a mirror's surface at a θ° angle vertically, then it reflects from the point of incidence at a θ° angle from vertically in the opposite direction. This law mathematically follows from the interference of a plane wave on a flat boundary (of much larger size than the wavelength).
In a plane mirror, a parallel beam of light changes its direction as a whole, while still remaining parallel; the images formed by a plane mirror are virtual images, of the same size as the original object (see mirror image).
In a concave mirror, parallel beams of light become a convergent beam, whose rays intersect in the focus of the mirror. Also known as converging mirror
In a convex mirror, parallel beams become divergent, with the rays appearing to diverge from a common point of intersection "behind" the mirror.
Spherical concave and convex mirrors do not focus parallel rays to a single point due to spherical aberration. However, the ideal of focusing to a point is a commonly-used approximation. Parabolic reflectors resolve this, allowing incoming parallel rays (for example, light from a distant star) to be focused to a small spot; almost an ideal point. Parabolic reflectors are not suitable for imaging nearby objects because the light rays are not parallel.
[edit]Mirror image
If one looks in a mirror, one's image reverses (e.g., if one raises one's right hand, his left hand will appear to go up in the mirror). However, a mirror does not "swap" left and right, any more than it swaps top and bottom. A mirror reverses the forward/backward axis, and we define left and right relative to front and back. Flipping front/back and left/right is equivalent to a rotation of 180 degrees about the vertical axis (in the same way that text which is back-to-front and upside-down simply looks like it has been rotated 180 degrees on the page). Therefore, looking at an image of oneself with the front/back axis flipped is the same as looking at an image with the left/right axis flipped and the whole figure rotated 180 degrees about the vertical axis, which is exactly what one sees when standing in front of a mirror.
[edit]Applications



Reflections in a spherical convex mirror. The photographer is seen at top right.


A mirror on a racing car.
[edit]Safety and easier viewing
Convex mirrors
Convex mirrors provide a wider field of view than flat mirrors, and are often used on vehicles, especially large trucks, to minimize blind spots. They are sometimes placed at road junctions, and corners of sites such as parking lots to allow people to see around corners to avoid crashing into other vehicles or shopping carts. They are also sometimes used as part of security systems, so that a single video camera can show more than one angle at a time.[citation needed]
Mouth mirrors or "dental mirrors"
Mouth mirrors or "dental mirrors" are used by dentists to allow indirect vision and lighting within the mouth. Their reflective surfaces may be either flat or curved. Mouth mirrors are also commonly used by mechanics to allow vision in tight spaces and around corners in equipment.
Rear-view mirrors
Rear-view mirrors are widely used in and on vehicles (such as automobiles, or bicycles), to allow drivers to see other vehicles coming up behind them. Some motorcycle helmets have a built-in so-called MROS (Multiple Reflective Optic System): a set of reflective surfaces inside the helmet that together function as a rear-view mirror.[21] On rear-view sunglasses, the left end of the left glass and the right end of the right glass work as mirrors.
[edit]Two-way versus one-way mirrors and windows
Main article: Two-way mirror
Two-way mirrors
A two-way mirror is a sheet of glass coated with a layer of metal only a few dozen atoms thick, which reflects some percentage of the light incident on it and transmits the remainder to the other side.
One-way mirrors
One-way mirrors work by overwhelming dim transmitted light with bright reflected light. A true one-way mirror that actually allows light to be transmitted in one direction only without requiring external energy is not possible as it violates the second law of thermodynamics: if one placed a cold object on the transmitting side and a hot one on the blocked side, radiant energy would be transferred from the cold to the hot object.
One-way windows
One-way windows can be made to work with polarized light in the laboratory without violating the second law. This is an apparent paradox that stumped some great physicists, although it does not allow a practical one-way mirror for use in the real world.[22][23] Optical isolators are one-way devices that are commonly used with lasers.
[edit]Signalling
Main article: Heliograph
With the sun as light source, a mirror can be used to signal by variations in the orientation of the mirror. The signal can be used over long distances, possibly up to 60 kilometres on a clear day. This technique was used by Native American tribes and numerous militaries to transmit information between distant outposts.
Mirrors can also be used for rescue to attract the attention of search and rescue helicopters. Specialized signalling mirrors are available and are often included in military survival kits.
[edit]Technology
[edit]Televisions and projectors
Microscopic mirrors are a core element of many of the largest high-definition televisions and video projectors. A common technology of this type is Texas Instruments' DLP. A DLP chip is a postage stamp-sized microchip whose surface is an array of millions of microscopic mirrors. The picture is created as the individual mirrors move to either reflect light toward the projection surface (pixel on), or toward a light absorbing surface (pixel off).
Other projection technologies involving mirrors include LCoS. Like a DLP chip, LCoS is a microchip of similar size, but rather than millions of individual mirrors, there is a single mirror that is actively shielded by a liquid crystal matrix with up to millions of pixels. The picture is formed as light is either reflected toward the projection surface (pixel on), or absorbed by the activated LCD pixels (pixel off). LCoS-based televisions and projectors often use 3 chips, one for each primary color.
Large mirrors are used in rear projection televisions. Light (for example from a DLP as mentioned above) is "folded" by one or more mirrors so that the television set is compact.
[edit]Instruments
See also: Mirror support cell


E-ELT mirror segments under test.
Telescopes and other precision instruments use front silvered or first surface mirrors, where the reflecting surface is placed on the front (or first) surface of the glass (this eliminates reflection from glass surface ordinary back mirrors have). Some of them use silver, but most are aluminium, which is more reflective at short wavelengths than silver. All of these coatings are easily damaged and require special handling. They reflect 90% to 95% of the incident light when new. The coatings are typically applied by vacuum deposition. A protective overcoat is usually applied before the mirror is removed from the vacuum, because the coating otherwise begins to corrode as soon as it is exposed to oxygen and humidity in the air. Front silvered mirrors have to be resurfaced occasionally to keep their quality. There are optical mirrors such as mangin mirrors that are second surface mirrors (reflective coating on the rear surface) as part of their optical designs, usually to correct optical aberrations.[24]
The reflectivity of the mirror coating can be measured using a reflectometer and for a particular metal it will be different for different wavelengths of light. This is exploited in some optical work to make cold mirrors and hot mirrors. A cold mirror is made by using a transparent substrate and choosing a coating material that is more reflective to visible light and more transmissive to infrared light. A hot mirror is the opposite, the coating preferentially reflects infrared. Mirror surfaces are sometimes given thin film overcoatings both to retard degradation of the surface and to increase their reflectivity in parts of the spectrum where they will be used. For instance, aluminum mirrors are commonly coated with silicon dioxide or magnesium fluoride. The reflectivity as a function of wavelength depends on both the thickness of the coating and on how it is applied.


A dielectric coated mirror used in a dye laser. The mirror is over 99% reflective at 550 nanometers, (yellow), but will allow most other colors to pass through.


A dielectric mirror used in lasers
For scientific optical work, dielectric mirrors are often used. These are glass (or sometimes other material) substrates on which one or more layers of dielectric material are deposited, to form an optical coating. By careful choice of the type and thickness of the dielectric layers, the range of wavelengths and amount of light reflected from the mirror can be specified. The best mirrors of this type can reflect 99.999% of the light (in a narrow range of wavelengths) which is incident on the mirror. Such mirrors are often used in lasers.
In astronomy, adaptive optics is a technique to measure variable image distortions and adapt a deformable mirror accordingly on a timescale of milliseconds, to compensate for the distortions.
Although most mirrors are designed to reflect visible light, surfaces reflecting other forms of electromagnetic radiation are also called "mirrors". The mirrors for other ranges of electromagnetic waves are used in optics and astronomy. Mirrors for radio waves (sometimes known as reflectors) are important elements of radio telescopes.
[edit]Face-to-face mirrors
Two or more mirrors placed exactly face to face can give an infinite regress of reflections. Some devices use this to generate multiple reflections:
Fabry–Pérot interferometer
Laser (which contains an optical cavity)
3D Kaleidoscope to concentrate light[25]
momentum-enhanced solar sail
[edit]Military applications
It has been said that Archimedes used a large array of mirrors to burn Roman ships during an attack on Syracuse. This has never been proven or disproved; however, it has been put to the test. Recently, on a popular Discovery Channel show, MythBusters, a team from MIT tried to recreate the famous "Archimedes Death Ray". They were successful at starting a fire on a ship at 75 feet away; however, previous attempts to light the boat on fire using only the bronze mirrors available in Archimedes' time were unsuccessful, and the time taken to ignite the craft would have made its use impractical, resulting in the MythBusters team deeming the myth "busted". It was however found that the mirrors made it very difficult for the passengers of the targeted boat to see, likely helping to cause their defeat, which may have been the origin of the myth. (See solar power tower for a practical use of this technique.)
[edit]Seasonal lighting


A multi-facet mirror in the Kibble Palace conservatory, Glasgow, Scotland
Due to its location in a steep-sided valley, the Italian town of Viganella gets no direct sunlight for seven weeks each winter. In 2006 a €100,000 computer-controlled mirror, 8×5 m, was installed to reflect sunlight into the town's piazza. In early 2007 the similarly situated village of Bondo, Switzerland, was considering applying this solution as well.[26][27] Mirrors can be used to produce enhanced lighting effects in greenhouses or conservatories.
[edit]Leisure
[edit]Art
[edit]Paintings


Titian's Venus with a mirror
Painters depicting someone gazing into a mirror often also show the person's reflection. This is a kind of abstraction—in most cases the angle of view is such that the person's reflection should not be visible. Similarly, in movies and still photography an actor or actress is often shown obstensibly looking at him- or herself in the mirror, and yet the reflection faces the camera. In reality, the actor or actress sees only the camera and its operator in this case, not their own reflection.[citation needed]
The mirror is the central device in some of the greatest of European paintings:[citation needed]
Édouard Manet's A Bar at the Folies-Bergère
Titian's Venus with a Mirror
Jan Van Eyck's Arnolfini Portrait
Pablo Picasso's Girl before a Mirror (1932)
Diego Velázquez's Las Meninas, wherein the viewer is both the watcher (of a self-portrait in progress) and the watched, and the many adaptations of that painting in various media
Veronese's Venus with a Mirror
Mirrors have been used by artists to create works and hone their craft:
Filippo Brunelleschi discovered linear perspective with the help of the mirror.[citation needed]
Leonardo da Vinci called the mirror the "master of painters". He recommended, "When you wish to see whether your whole picture accords with what you have portrayed from nature take a mirror and reflect the actual object in it. Compare what is reflected with your painting and carefully consider whether both likenesses of the subject correspond, particularly in regard to the mirror."[citation needed]
Many self-portraits are made possible through the use of mirrors:
Without a mirror, the great self-portraits by Dürer, Frida Kahlo, Rembrandt, and Van Gogh could not have been painted.[citation needed]
M. C. Escher used special shapes of mirrors in order to achieve a much more complete view of his surroundings than by direct observation in Hand with Reflecting Sphere (also known as Self-Portrait in Spherical Mirror).
Mirrors are sometimes necessary to fully appreciate art work:
István Orosz's anamorphic works are images distorted such that they only become clearly visible when reflected in a suitably shaped and positioned mirror.[citation needed]
[edit]Other artistic mediums
Some other contemporary artists use mirrors as the material of art:
A Chinese magic mirror is an art in which the face of the bronze mirror projects the same image that was cast on its back. This is due to minute curvatures on its front.[28]
Paintings on mirror surfaces (such as silkscreen printed glass mirrors)
Sculptures comprised entirely or in part of mirrors
Infinity Also Hurts is a mirror, glass and silicone sculpture by artist, Seth Wulsin
Sky Mirror is a public sculpture by artist, Anish Kapoor
Special mirror installations
Follow Me mirror labyrinth by artist, Jeppe Hein (see also, Entertainment: Mirror mazes, below)
Mirror Neon Cube by artist, Jeppe Hein
[edit]Decoration


Chimneypiece and overmantel mirror, c. 1750 V&A Museum no. 738:1 to 3-1897
Mirrors are frequently used in interior decoration and as ornaments:
Mirrors, typically large and unframed, are frequently used in interior decoration to create an illusion of space and amplify the apparent size of a room.[citation needed] They come also framed in a variety of forms, such as the pier glass and the overmantle mirror.
Mirrors are used also in some schools of feng shui, an ancient Chinese practice of placement and arrangement of space, to achieve harmony with the environment.
The softness of old mirrors is sometimes replicated by contemporary artisans for use in interior design. These reproduction antiqued mirrors are works of art and can bring color and texture to an otherwise hard, cold reflective surface. It is an artistic process that has been attempted by many and perfected by few.[citation needed]
A decorative reflecting sphere of thin metal-coated glass, working as a reducing wide-angle mirror, is sold as a Christmas ornament called a bauble.
[edit]Entertainment
Illuminated rotating disco balls covered with small mirrors are used to cast moving spots of light around a dance floor.
The hall of mirrors, commonly found in amusement parks, is an attraction in which a number of distorting mirrors are used to produce unusual reflections of the visitor.
Mirrors are employed in kaleidoscopes, personal entertainment devices invented in Scotland by Sir David Brewster.
Mirrors are often used in magic to create an illusion. One effect is called Pepper's ghost.
Mirror mazes, often found in amusement parks as well, contain large numbers of mirrors and sheets of glass. The idea is to navigate the disorientating array without bumping into the walls. Mirrors in attractions like this are often made of plexiglass as to assure that they do not break.[citation needed]
[edit]Film and television
Candyman is a horror movie about mirrors
Mirrors is a horror movie about mirrors
Poltergeist III features mirrors as a major theme
The 10th Kingdom miniseries requires the use of a magic mirror for the characters to change setting between modern day New York City (the 10th Kingdom), and the Nine Kingdoms of fairy tale, primarily the 4th Kingdom from Snow White.
[edit]Literature


An illustration from page 30 of Mjallhvít (Snow White) an 1852 Icelandic translation of the Grimm-version fairytale


Taijitu within a frame of trigrams and a demon warding mirror. These charms are believed to frighten away evil spirits and to protect the dwelling from bad luck
Mirrors play a powerful role in cultural literature.
The Holy Bible passage, 1 Corinthians 13:12: "Through a Glass Darkly" references a dim mirror image or poor mirror reflection
The magical objects employed in the Harry Potter series include:mirrors: the Mirror of Erised and two-way mirrors
In Alfred, Lord Tennyson's famous poem "The Lady of Shalott", the titular character possesses a mirror that enables her to look out on the people of Camelot, as she is under a curse that prevents her from seeing Camelot directly.
Narcissus of Greek mythology wastes away while gazing, self-admiringly, at his reflection in water
In Oscar Wilde's novel, The Picture of Dorian Gray, a portrait serves as a magical mirror that reflects the true visage of the perpetually youthful protagonist, as well as the effect on his soul of each sinful act[29][30]
In the European fairy tale, Snow White, the evil queen asks, "Mirror, mirror, on the wall... who's the fairest of them all?"
Lewis Carroll's Through the Looking-Glass is one of the best-loved uses of mirrors in literature. The text itself utilizes a narrative that mirrors that of its predecessor, Alice's Adventures in Wonderland.[citation needed]
Under "Appendix: Variant Planes & Cosmologies" of the Dungeons & Dragons Manual Of The Planes, is The Plane of Mirrors (page 204).[31] It describes the Plane of Mirrors as a space existing behind reflective surfaces, and experienced by visitors as a long corridor. The greatest danger to visitors upon entering the plane is the instant creation of a mirror-self with the opposite alignment of the original visitor.
[edit]Mirrors and psychology

Spectrophobia is the fear of mirrors.
[edit]Mirrors and superstition

There are many legends and superstitions surrounding mirrors. Mirrors are said to be a reflection of the soul, and they were often used in traditional witchcraft as tools for scrying or performing other spells. It is also said that mirrors cannot lie. They can show only the truth, so it is a bad omen to see something in a mirror which should not be there. Also there is a legend that a newborn child should not see a mirror until its first birthday as its soul is still developing. If the child sees its reflection it is said that it will die.
It is a common superstition that someone who breaks a mirror will receive seven years of bad luck.[32] The reason for this belief is that the mirror is believed to reflect part of the soul. Therefore, breaking a mirror will break part of the soul. However, the soul is said to regenerate every seven years, thus coming back unbroken.[citation needed] To prevent a broken mirror from reflecting a broken soul during the seven-year interim, one of many rituals must be performed. Two alternatives include grinding the broken mirror to dust (perhaps the easiest approach)[33] or burying the mirror.[citation needed] It is also said that tapping the broken mirror on a gravestone seven times will allow the soul to heal. However, if the mirror is both touched to the gravestone and buried, the bad luck will remain. The only course of action for one in this position is to dig up the mirror and grind it to dust. This dust must be sprinkled around the same gravestone on which the mirror was initially tapped.[citation needed]
There is a Buddhist belief that negative spirits will enter houses through the door if they have triangular-shaped roofs. Hanging a small circular mirror in front of the door will prevent the bad spirits from entering.[citation needed]
In days past, it was customary in the southern United States to cover the mirrors in a house where the wake of a deceased person was being held. It was believed that the person's soul would become trapped in a mirror if it was left uncovered. This practice is still followed in other countries (e.g., Romania), extending to everything that could reflect the deceased person's face (such as TVs and appliances). Another explanation given is that the devil will appear in the reflection of the dead. Mirrors falling from walls or otherwise breaking or cracking mysteriously were said to be haunted. A similar custom existed in Greece, in the belief that use of mirrors is a sign of vanity that does not become mourning. (Other Greek mourning customs include not playing music, not entertaining guests, and using no festive decorations, e.g. on Christmas, during the customary year-long mourning period).[citation needed]
According to legend, a vampire has no reflection in mirrors because it is an undead creature and has already lost its soul.[citation needed]
Another superstition claims it is bad luck to have two mirrors facing each other.[citation needed]
A staple of childhood slumber parties is the game Bloody Mary, which involves chanting "Bloody Mary" three times in a darkened room while staring into a mirror. There are many versions of the game, but the general idea is that "Mary" will appear in the mirror and attempt to harm or kill the person who has summoned her. Thanks to a series of popular horror movies based on a supernatural killer who haunted mirrors, the phrase "Candyman" may be substituted for Mary.[citation needed]
[edit]Mirrors and animals



The Asian elephant can recognize its own reflection in a mirror


4.5-metre (15 ft) high acoustic mirror near Kilnsea Grange, East Yorkshire, UK
Experiments have shown that only large-brained social animals are able to recognize that a mirror shows a reflection of themselves.[34][not in citation given][contradiction] The following animals have shown they are able to use a mirror to study themselves:
Asian elephants
Bonobos
Common chimpanzees
Dolphins
European Magpies
Humans
Magpies
Orangutans
[edit]Unusual kinds of mirrors

Other types of reflecting device are also called "mirrors".
Acoustic mirrors are passive devices used to reflect and perhaps to focus sound waves. Acoustic mirrors were used for selective detection of sound waves, especially during World War II. They were used for detection of enemy aircraft prior to the development of radar. Acoustic mirrors are used for remote probing of the atmosphere; they can be used to form a narrow diffraction-limited beam.[35] They can also be used for underwater imaging.
Active mirrors are mirrors that amplify the light they reflect. They are used to make disk lasers.[36] The amplification is typically over a narrow range of wavelengths, and requires an external source of power.
Atomic mirrors are devices which reflect matter waves. Usually, atomic mirrors work at grazing incidence. Such mirrors can be used for atomic interferometry and atomic holography. It has been proposed that they can be used for non-destructive imaging systems with nanometer resolution.[37]
Cold mirrors are dielectric mirrors that reflect the entire visible light spectrum, while efficiently transmitting infrared wavelengths. These are the converse of hot mirrors.
Corner reflectors use three flat mirrors to reflect light back towards its source. They are used for emergency location, and even laser ranging to the Moon.
Hot mirrors reflect infrared light while allowing visible light to pass. These can be used to separate useful light from unneeded infrared to reduce heating of components in an optical device. They can also be used as dichroic beamsplitters. (Hot mirrors are the converse of cold mirrors.)
Metallic reflectors are used to reflect infrared light (such as in space heaters or microwaves).
Non-reversing mirrors are mirrors that provide a non-reversed image of their subjects.
X-ray mirrors produce specular reflection of X-rays. All known types work only at angles near grazing incidence, and only a small fraction of the rays are reflected.[38] See also X-ray optics.
[edit]See also

Anamorphosis
Aranmula kannadi
Bronze mirror
Chirality (mathematics)
Cold mirror and Hot mirror
Curved mirror
Deformable mirror
Dielectric mirror
Digital micromirror device
Distorting mirror
Home decor
Honeycomb mirror
List of telescope parts and construction
Mirror armour (an oriental partial plate armour from polished metal mirrors)
Mirror Mirror: a history of the human love affair with reflection (book)
Mirror writing
Perfect mirror
Periscope
Rear-view mirror
Reflectivity
Silvering
TLV mirror — An ancient type of Chinese mirror from the Han Dynasty.
Two-way mirror (Also known as one-way mirror)
Venus effect
[edit]Notes

^ a b History of Mirrors Dating Back 8000 Years, Jay M. Enoch, School of Optometry, University of California at Berkeley
^ The National Museum of Science and Technology, Stockholm
^ Chinavoc.com
^ Google Books Search, by Joseph Needham, Gwei-djen Lu, Science and civilisation in China, Volume 5, page 238
^ Books Search, Albert Allis, The Scientific American cyclopedia of formulas, page 89
^ Mirrors in Egypt, Digital Egypt for Universities
^ Wondrous Glass: Images and Allegories, Kelsey Museum of Archaeology
^ The Book of the Mirror, Cambridge Scholars Publishing, edited by Miranda Anderson
^ pp. 162–164, Apollonius of Perga's Conica: text, context, subtext, Michael N. Fried and Sabetai Unguru, Brill, 2001, ISBN 90-04-11977-9.
^ p. 64, Mirror mirror: a history of the human love affair with reflection, Mark Pendergrast, Basic Books, 2004, ISBN 0-465-05471-4
^ pp. 38 ff., Ptolemy's Theory of Visual Perception: An English Translation of the "Optics" with Introduction and Commentary, A. Mark Smith, Transactions of the American Philosophical Society, new series 86, #2 (1996), pp. iii–300.
^ pp. 465, 468, 469, A Pioneer in Anaclastics: Ibn Sahl on Burning Mirrors and Lenses, Roshdi Rashed, Isis, 81, #3 (September 1990), pp. 464–491, doi:10.1086/355456.
^ R. S. Elliott (1966). Electromagnetics, Chapter 1. McGraw-Hill.
^ Dr. Mahmoud Al Deek. "Ibn Al-Haitham: Master of Optics, Mathematics, Physics and Medicine, Al Shindagah, November–December 2004.
^ Dr. Kasem Ajram (1992). The Miracle of Islam Science (2nd ed.). Knowledge House Publishers. ISBN 0-911119-43-4.
^ Archaeominerology By George Rapp - Springer Verlag Berlin Heidelberg 2009 page 180
^ The Tin-Mercury Mirror: Its Manufacturing Technique and Deterioration Processes, Per Hadsund, Studies in Conservation, Vol. 38, No. 1 (Feb., 1993)
^ Liebig, Justus (1856). "Ueber Versilberung und Vergoldung von Glas". Annalen der Chemie und Pharmacie 98 (1): 132–139. doi:10.1002/jlac.18560980112.
^ Mirror Manufacturing and Composition
^ Episode 305 of How It's Made, filmed at verrerie-walker.com in Anjou, Quebec, Canada
^ http://www.reevu.fr
^ Mungan, C.E. (1999). "Faraday Isolators and Kirchhoff's Law: A Puzzle" (pdf). Retrieved 18 July 2006.
^ Rayleigh, On the magnetic rotation of light and the second law of thermodynamics, Nature (London), Vol. 64, p. 577 (October 10, 1901). http://www.nature.com/nature/journal/v64/n1667/abs/064577e0.html
^ Mirror Lenses - how good? Tamron 500/8 SP vs Canon 500/4.5L
^ Ivan Moreno (2010). "Output irradiance of tapered lightpipes". JOSA A 27 (9): 1985. Bibcode 2010JOSAA..27.1985M. doi:10.1364/JOSAA.27.001985.
^ "Italy village gets 'sun mirror'". BBC News. 18 December 2006. Retrieved 12 May 2010.
^ "Swiss Officials Want to Spread Sunshine, Swiss Officials May Build Giant Mirror to Give Light to Sunless Village - CBS News".[dead link]
^ "Magic Mirrors". The Courier (Unesco): 16–17. October 1988. ISSN 0041-5278. Retrieved 23 August 2011.
^ Simon Callow (Saturday 19 September 2009). "Mirror, mirror". guardian.co.uk. The Guardian: Culture Web. Retrieved 2010, November 20.
^ "The Picture of Dorian Gray". Sparknotes.com. Retrieved 2010, November 20.
^ Grubb, Jeff; David Noonan and Bruce R. Cordell (2001). Manual Of The Planes. Wizards of the Coast. ISBN 0-7869-1850-0.
^ Milkinson, David; Barbara (2009). "Breaking a Mirror". Urban Legends Reference Pages. Snopes.com. p. 1. Retrieved 29 August 2009.
^ www.mirrorsmyth.com
^ "Elephants see themselves in the mirror". Peter Aldhous. New Scientist. 30 October 2006. Retrieved 24 May 2007.
^ M. A. Kallistratova (1997). "Physical grounds for acoustic remote sensing of the atmospheric boundary layer". Lecture Notes in Earth Sciences. Lecture Notes in Earth Sciences 69: 3–34. doi:10.1007/BFb0009558. ISBN 3-540-61612-8.
^ K. Ueda; N. Uehara (1993). "Laser-diode-pumped solid state lasers for gravitational wave antenna". Proceedings of SPIE 1837: 336–345. doi:10.1117/12.143686.[dead link]
^ D. Kouznetsov; H. Oberst, K. Shimizu, A. Neumann, Y. Kuznetsova, J.-F. Bisson, K. Ueda, S. R. J. Brueck (2006). "Ridged atomic mirrors and atomic nanoscope". Journal of Physics B 39 (7): 1605–1623. Bibcode 2006JPhB...39.1605K. doi:10.1088/0953-4075/39/7/005.
^ V.V.Protopopov; V.A.Shishkov, and V.A.Kalnov (2000). "X-ray parabolic collimator with depth-graded multilayer mirror". Review of Scientific Instruments 71 (12): 4380–4386. Bibcode 2000RScI...71.4380P. doi:10.1063/1.1327305.
[edit]References

Mirror Manufacturing and Composition, Mirrorlink
Stannous Chloride: Silvering Mirrors, American Chemical Association
[edit]Bibliography

Mirror, Mirror: A History of the Human Love Affair with Reflection, Mark Pendergrast. Basic Books (2003). ISBN 0-465-05471-4 .
On reflection, Jonathan Miller, National Gallery Publications Limited (1998). ISBN 0-300-07713-0 .
The Mirror: A History, Sabine Melchior-Bonnet, Routledge, 2001, ISBN 0-415-92448-0
[edit]External links

Look up mirror in Wiktionary, the free dictionary.
Wikimedia Commons has media related to: Mirrors
Video of Mirror Making
The Mirror: A History by Sabine Melchior-Bonnet at Google Books
The Narcissus Syndrome Revisited by Yves Doré
How Mirrors Are Made (video), Glass Association of North America (GANA)
Knol/Google Mirror page
Choosing the Perfect Mirror
How Antique Mirrors can be reproduced
View page ratings
Rate this page
What's this?
Trustworthy
Objective
Complete
Well-written
I am highly knowledgeable about this topic (optional)

Submit ratings
Categories: Reflective building componentsMirrorsGlass applications
همچنین:
واژه های قبلی و بعدی
واژه های همانند
۴۹ مورد، زمان جستجو: ۰.۲۸ ثانیه
آئینه . [ ن َ / ن ِ ] (اِ) رجوع به آیینه شود.
خانه ٔ آئینه . [ ن َ / ن ِ ی ِ ن َ/ ن ِ ] (ترکیب اضافی ، اِ مرکب ) آئینه خانه . (آنندراج ) : این خانه که چون چشم بود معدن نوراز آینه اش دیده ...
در علوم رایانه، آینه (به انگلیسی: Mirror) به نسخه رونوشت عینی یک مجموعه داده گفته می‌شود. در شبکهٔ اینترنت یک وب‌گاه آینه، رونوشتی عینی (کپی دقیق و کا...
وایقان آئینه لو. [ ن َ ] (اِخ ) دهی است جزو دهستان میشه پاره ٔ بخش کلیبر شهرستان اهر، واقع در 20هزارگزی شوسه ٔ اهر به کلیبر، دارای 392 تن سکن...
آیینه . [ ن َ / ن ِ ] (اِ) آینه . مرآت . آئینه . آبگینه : آیینه عزیز شد بر ماچون نور گرفت و روشنائی . ناصرخسرو.هنگام سپیده دم خروس سحری دانی ک...
آیینه . [ ن َ / ن ِ ] (اِ) هر یک از قطعات آهنین که مبارزترین پوشیدی : نماید ز آیینه پوشی سوارچو آیینه ٔ تیغ در کارزار. طاهر وحید.ماه سر منجوق ...
آیینه . [ ن َ / ن ِ ] (اِ) آینه . سان . آئین . طریق . منوال .گونه . حال و صورت . و هرآیینه و هرآینه مرکب از هر وآینه به معنی مذکور است که به ...
آیینه . [ ن َ ] (اِخ ) رجوع به ایل کرند شود.
عیینة. [ ع ُ ی َی ْ ن َ ] (ع اِ مصغر) تصغیر عین است . یعنی چشم خرد. (از منتهی الارب ) (از ناظم الاطباء). رجوع به عَین شود.
عیینة. [ ع ُ ی َی ْ ن َ ] (اِخ ) ابن عبدالرحمان . محدث . رجوع به ابومالک (عیینة...) شود.
« قبلی صفحه ۱ از ۵ ۲ ۳ ۴ ۵ بعدی »
نظرهای کاربران
نظرات ابراز شده‌ی کاربران، بیانگر عقیده خود آن‌ها است و لزوماً مورد تأیید پارسی ویکی نیست.
برای نظر دادن ابتدا باید به سیستم وارد شوید. برای ورود به سیستم روی کلید زیر کلیک کنید.